Coin or token operated timer for up to 3 showers
to control the usage from 1 to 3 showers in collective spaces
Wall-mounted timer for 1 to 3 showers with 1€ or 2€ coins, or tokens (accepts all 3)
Solenoid valve opening controlled by coin or token.
User shower selection: before inserting the coin or token, the user selects the shower by pressing a button, then the shower number is displayed on the screen.
Two operating modes:
1 - Direct control = water flows 30 seconds after coin insertion for a fixed time (adjustable 0 - 255 sec)
2 - Interactive control = the user turns on the water flow directly.
Installation with a shower tap featuring a sensitive Piezo operating button, connected to the timer. Flow time is calculated when the shower is turned on, with a maximum interruption time of 4 minutes (these 4 minutes include the time between room insertion and shower start-up).
Factory-set limit of 4 minutes to avoid blocking the shower for following users if the time set per user is not used (adjustable by remote control).
Configuration available on request.
The timer will add up the coins but will not give them back.
Settings can be adjusted using the SLD05 remote control (setting of shower time according to room or token inserted, start-up delay, activation of periodic hygiene rinse, token value, display contrast, option to turn off certain showers).
Vandal-proof.
Periodic hygiene rinse.
The user is warned by a brief stop in the water flow 30 seconds before the end.
Possibility of obtaining usage statistics and on-screen device diagnostics.
With lock.
For internal use (+5 to 40°C).
- Power supply
- 230/24V transformer
- Material
- Bacteriostatic AISI 304 stainless steel
- Stainless steel thickness
- 1 mm
- Finish
- Brushed
- Duration
- To be specified when ordering
- Operation settings
- Adjustable by SLD05 remote control: sensitivity, flushing time, use time, on/off
- Dimensions
- W165 x D132 x H300 mm
- Warranty
- Electronics 5 years
Wall-mounted timer for 1 to 3 showers with 1€ or 2€ coins, or tokens (accepts all 3)
Solenoid valve opening controlled by coin or token.
User shower selection: before inserting the coin or token, the user selects the shower by pressing a button, then the shower number is displayed on the screen.
Two operating modes:
1 - Direct control = water flows 30 seconds after coin insertion for a fixed time (adjustable 0 - 255 sec)
2 - Interactive control = the user turns on the water flow directly.
Installation with a shower tap featuring a sensitive Piezo operating button, connected to the timer. Flow time is calculated when the shower is turned on, with a maximum interruption time of 4 minutes (these 4 minutes include the time between room insertion and shower start-up).
Factory-set limit of 4 minutes to avoid blocking the shower for following users if the time set per user is not used (adjustable by remote control).
Configuration available on request.
The timer will add up the coins but will not give them back.
Settings can be adjusted using the SLD05 remote control (setting of shower time according to room or token inserted, start-up delay, activation of periodic hygiene rinse, token value, display contrast, option to turn off certain showers).
Vandal-proof.
Periodic hygiene rinse.
The user is warned by a brief stop in the water flow 30 seconds before the end.
Possibility of obtaining usage statistics and on-screen device diagnostics.
With lock.
For internal use (+5 to 40°C).
- Power supply
- 230/24V transformer
- Material
- Bacteriostatic AISI 304 stainless steel
- Stainless steel thickness
- 1 mm
- Finish
- Brushed
- Duration
- To be specified when ordering
- Operation settings
- Adjustable by SLD05 remote control: sensitivity, flushing time, use time, on/off
- Dimensions
- W165 x D132 x H300 mm
- Warranty
- Electronics 5 years
Complementary products
Related Products