Stainless steel wash trough with splashback for tapware INTER-1

Multi-user wash trough made from AISI 304 grade stainless steel

- Splashback specially designed to house the pipework and tapware, so no work in the wall is needed.
   Without taps = includes F 1/2'' stainless steel connectors for wall-mounted taps and a single F1/2'' water inlet connector on pre-connected pipes.
- Innovative design for perfect hygiene.
- Robot-welded with no grooves in the corners, preventing the growth of bacteria.
- Inside angles along the length of the basin > 90° for easier cleaning.
- The flat bottom takes a 15 l bucket.
- No dust ledge under the basin, for hygiene.
- Bowl depth 151 mm. Perforated central 1 1/2" waste grid.
- Quick and easy installation with 4 fixing points.
- Complies with EN 14296 on the load resistance of sanitary appliances.

Rounded corners to prevent injury on impact	Pressed waste with no water retention or screws, for hygiene and easy cleaning	High-quality welding. Inside angles greater than 90°	Enough room for a bucket	F1/2’’ stainless steel ring for fitting and removing the self-closing spout from the front = easy maintenance

In the food industry, wash troughs must meet hygiene and cleanability requirements. Standard EN 1672-2 states
that "no food residue should remain in small crevices, from which it is difficult or even impossible to remove". INTER basins are very well designed in this respect: there are no horizontal surfaces at the back and water is never held back (which would lead to the growth of micro-organisms).
In addition, the back and underside of the wash trough are designed so that dirty splashes (from cleaning the floor and wall, for example) cannot collect behind it.
The waste is laser-cut into the steel sheet, with no water retention. The inside corners are designed to be cleaned and disinfected effectively. The welds are smoothed, preventing biofilm from forming.
The standard material is AISI 304 stainless steel, which is sufficient for food industry applications.
The INTER-1 model complies with the guidelines applicable in the food industry and minimises microbiological and allergen risks.

Accessories: stainless steel wall cabinet and stainless steel trap cover skirt		Used as a foot wash with stainless steel grids

Built-in tapware available on request:

Push-button tap, removable from the front M3P	Soft-touch push-button tap M3DS	Single ceramic 1/2-turn tap M2	Single tap with extended lever M4	Two-handle mixer tap M5	Single-lever mixer tap M6	Touch-free sensor tap M9	Touch-free sensor tap M13