Stainless steel floor-standing semi-column automatic drinking fountain

Floor-standing semi-column stainless steel drinking fountain with bubbler tap and automatic non-contact water flow activation.

Easy to use and improved hygiene, reducing the risk of cross-contamination.
Splashback panel to protect the wall from water and facilitate cleaning.
Closed base for concealed drainage and additional protection against vandalism or dirt accumulation.
Designed for indoor or covered outdoor use in high-traffic areas such as schools, offices, railway stations, airports, shopping centres, collective catering facilities, hospitals, sports halls, etc...

Fountain in AISI 304 stainless steel, 1 mm thickness, brushed and polished finish.
Stainless steel bubbler tap with infrared detection on 230/24V transformer or 6V batteries. Adjustable flow rate (min. 0.4 L/min.).
STANDARD operating mode = water flows as long as the person or object is in the detection area or ON/OFF operating mode = water flows when the hand is brought 5-10 cm from the detection and stops after an established duration or earlier, when the hand is brought near again.
Solenoid valve, hoses, angle stop valve with integrated filter.
Low battery indicator for replacement.
Safety shut-off after 5 minutes of continuous operation (adjustable).
Periodic rinsing to prevent Legionella.
Pressed bowl Ø 280 x H40 mm. Vandal-resistant perforated plug.
Splashback panel H30 mm.
Floor installation with wall fixing.
3 adjustable feet for levelling. Fixings supplied.
Water inlet M 3/8". Drainage hose Ø19 mm.

Dimensions: W350 x D360 x H910 mm.
CE. Electronics guaranteed for 5 years.