Stainless steel wash trough for wall-mounted tapware
up to 3 m
Technical sheet & documents
No technical sheet available for this reference. Request the sheet
Stainless steel wash trough for wall-mounted tapware, where several users can wash their hands at the same time.
A practical, durable solution for washrooms that require strict hygiene in public or industrial premises.
Made from AISI 304 stainless steel for a long service life and high corrosion resistance, ideal for damp, high-traffic environments.
No rear deck for use with wall-mounted tapware: fewer areas where water can collect, and easier cleaning.
Ideal for schools, factories, workshops, commercial kitchens and any other place where several people need to wash their hands frequently.
- Accessible to people with reduced mobility from a width of 100 cm.
- Robotic welding with no grooves in the corners, preventing bacterial growth.
- Inner corners along the length of the basin > 90° for easier cleaning.
- Flat bottom that takes a 15 l bucket.
- Bowl depth 142 mm. Central perforated 1 1/2" waste grate.
- Quick, easy installation with 4 fixing points.
- Complies with EN 14296 on the load resistance of sanitary appliances.
 |
 |
 |
 |
 |
 |
| Rounded corners to prevent injury on impact | Pressed waste with no water retention or screws, for hygiene and easy cleaning | High-quality welding. Inner corners greater than 90° | Enough room for a bucket | Optional lift-up stainless steel grid, as a support or draining rack | "SOFT TOUCH" with wide folded lower edges |
- Material
- AISI 304 stainless steel
- Detailed composition
- Sides 1.5 mm - tank 1 mm
- Stainless steel thickness
- 1 mm
1.5 mm - Finish
- Brushed
- Evacuation
- Ø 40 mm
- Waste connection
- 1 1/2"
- Fixing
- Wall mounted
- Dimensions
- W600 x D400 x H196 mm
W1000 x D400 x H196 mm
W1200 x D400 x H196 mm
W1400 x D400 x H196 mm
W1500 x D400 x H196 mm
W1800 x D400 x H196 mm
W2000 x D400 x H196 mm
W2100 x D400 x H196 mm
W2400 x D400 x H196 mm
W2800 x D400 x H196 mm
W3000 x D400 x H196 mm
Stainless steel wash trough for wall-mounted tapware, where several users can wash their hands at the same time.
A practical, durable solution for washrooms that require strict hygiene in public or industrial premises.
Made from AISI 304 stainless steel for a long service life and high corrosion resistance, ideal for damp, high-traffic environments.
No rear deck for use with wall-mounted tapware: fewer areas where water can collect, and easier cleaning.
Ideal for schools, factories, workshops, commercial kitchens and any other place where several people need to wash their hands frequently.
- Accessible to people with reduced mobility from a width of 100 cm.
- Robotic welding with no grooves in the corners, preventing bacterial growth.
- Inner corners along the length of the basin > 90° for easier cleaning.
- Flat bottom that takes a 15 l bucket.
- Bowl depth 142 mm. Central perforated 1 1/2" waste grate.
- Quick, easy installation with 4 fixing points.
- Complies with EN 14296 on the load resistance of sanitary appliances.
|
|
|
|
|
|
| Rounded corners to prevent injury on impact | Pressed waste with no water retention or screws, for hygiene and easy cleaning | High-quality welding. Inner corners greater than 90° | Enough room for a bucket | Optional lift-up stainless steel grid, as a support or draining rack | "SOFT TOUCH" with wide folded lower edges |
- Material
- AISI 304 stainless steel
- Detailed composition
- Sides 1.5 mm - tank 1 mm
- Stainless steel thickness
- 1 mm
1.5 mm - Finish
- Brushed
- Evacuation
- Ø 40 mm
- Waste connection
- 1 1/2"
- Fixing
- Wall mounted
- Dimensions
- W600 x D400 x H196 mm
W1000 x D400 x H196 mm
W1200 x D400 x H196 mm
W1400 x D400 x H196 mm
W1500 x D400 x H196 mm
W1800 x D400 x H196 mm
W2000 x D400 x H196 mm
W2100 x D400 x H196 mm
W2400 x D400 x H196 mm
W2800 x D400 x H196 mm
W3000 x D400 x H196 mm
Complementary products
Related Products
