RONDEO TRIO basin support frame for soap, water and air
Robust, simplified installation
RONDEO TRIO metal basin support frame with an integrated sensor tap for cold or pre-mixed water, an electronic soap dispenser and a touch-free hand dryer.
A complete touch-free hand-washing solution that optimises costs.
It supplies exactly the amount of soap and water needed to wash hands, keeping consumption under control.
Wall-mounted tapware is valued for creating a clean, elegant environment, but it requires precise installation.
With the support frame for touch-free water, soap and air tapware, installation is extremely simple and robust.
The frame makes installation quick and easy, in a few steps: assemble the support frame, fix and connect the tap, soap dispenser and hand dryer, fix the basin, and the job is done.
Advantages:
- Allows robust, simplified installation.
- Minimises water splashing on the floor and around the basin.
- Vandal-resistant fixing of the spouts on a metal frame.
- Drastic reduction in water and soap consumption.
- Touch-free. Helps protect users against cross-contamination.
- Adjustable waste outlet, basin and tapware heights.
- Provides a complete electronic water, air and soap solution, together with all the mounting components (basin not included).
Technical specifications:
- For partitions up to 40 mm thick (70 mm as an option).
- Frame height adjustable from 1140 to 1340 mm.
- Galvanised swivel feet, height adjustable from 0 to 200 mm.
- Basin fixing centres: 60-360 mm.
- Frame in 40/40 mm C-profile. Blue epoxy paint.
- Protective cover for the openings against moisture and dirt, to be trimmed to the partition thickness.
- Infrared sensor tapware, adjustable at any time with the RES-31 remote control: sensor range, safety shut-off delay, flow stop delay, temporary shut-off.
- Hand dryer power and noise level adjustable with a button. HEPA filter.
- 3-year limited warranty.
Supplied with:
RONDEO electronic soap dispenser with 150 mm spout, RONDEO sensor tap with 170 mm spout, RONDEO hand dryer with 220 mm spout; ø 50 mm waste elbow, ø 44/32 mm seal, 2 M10 threaded rods for fixing the basin, with bolt covers, set of floor and wall fixings.
Components
|
RONDEO sensor tap |
|
|
Installation |
Wall-mounted, concealed, on a support frame |
|
Power supply |
12 V transformer (for water and soap, with splitter connector) |
|
Pressure |
0.5-8 bar |
|
Water supply |
Cold or pre-mixed water |
|
Water flow rate |
6 l/min; 3, 1.9 or 1.3 l/min as an option |
|
Temperature |
Max. 70 °C |
|
Safety shut-off |
After 90 s of continuous flow (adjustable by remote control) |
|
Periodic flush |
24 h after last use |
|
RONDEO soap dispenser |
|
|
Installation |
Wall-mounted, concealed, on a support frame |
|
Power supply |
12 V transformer (for water and soap, with splitter connector). |
|
Soap |
1 l tank. Peristaltic pump for all types of liquid soap, detergent or antibacterial gel. |
|
Soap dose |
Default: 1.2-1.6 cc (adjustable by remote control). |
|
Filling |
Soap priming with a button on the pump or by remote control |
|
RONDEO hand dryer |
|
|
Installation |
Wall-mounted, concealed, on a support frame |
|
Rated power |
Adjustable from 800 to 1600 W (button accessible on the motor unit) |
|
Power supply |
200-240 V, 50-60 Hz, 1.3-1.6 kW. Current: 6.1-6.7 A |
|
Motor thermal protection |
Safety thermostat at 95 °C with automatic reset |
|
Heating element thermal protection |
Safety thermostat at 85 °C with automatic reset. Thermal cut-off fuse at 142 °C. |
|
Standby consumption |
0.3-0.4 W |
|
Safety shut-off |
After 60 s of continuous flow |
|
Sensor range |
170 mm ± 20, self-adjusting |
|
Protection rating |
IP34 |
- Hygienic rinse anti-legionella
- After 24 H of non-use
- Water supply
- Single supply
RONDEO TRIO metal basin support frame with an integrated sensor tap for cold or pre-mixed water, an electronic soap dispenser and a touch-free hand dryer.
A complete touch-free hand-washing solution that optimises costs.
It supplies exactly the amount of soap and water needed to wash hands, keeping consumption under control.
Wall-mounted tapware is valued for creating a clean, elegant environment, but it requires precise installation.
With the support frame for touch-free water, soap and air tapware, installation is extremely simple and robust.
The frame makes installation quick and easy, in a few steps: assemble the support frame, fix and connect the tap, soap dispenser and hand dryer, fix the basin, and the job is done.
Advantages:
- Allows robust, simplified installation.
- Minimises water splashing on the floor and around the basin.
- Vandal-resistant fixing of the spouts on a metal frame.
- Drastic reduction in water and soap consumption.
- Touch-free. Helps protect users against cross-contamination.
- Adjustable waste outlet, basin and tapware heights.
- Provides a complete electronic water, air and soap solution, together with all the mounting components (basin not included).
Technical specifications:
- For partitions up to 40 mm thick (70 mm as an option).
- Frame height adjustable from 1140 to 1340 mm.
- Galvanised swivel feet, height adjustable from 0 to 200 mm.
- Basin fixing centres: 60-360 mm.
- Frame in 40/40 mm C-profile. Blue epoxy paint.
- Protective cover for the openings against moisture and dirt, to be trimmed to the partition thickness.
- Infrared sensor tapware, adjustable at any time with the RES-31 remote control: sensor range, safety shut-off delay, flow stop delay, temporary shut-off.
- Hand dryer power and noise level adjustable with a button. HEPA filter.
- 3-year limited warranty.
Supplied with:
RONDEO electronic soap dispenser with 150 mm spout, RONDEO sensor tap with 170 mm spout, RONDEO hand dryer with 220 mm spout; ø 50 mm waste elbow, ø 44/32 mm seal, 2 M10 threaded rods for fixing the basin, with bolt covers, set of floor and wall fixings.
Components
|
RONDEO sensor tap |
|
|
Installation |
Wall-mounted, concealed, on a support frame |
|
Power supply |
12 V transformer (for water and soap, with splitter connector) |
|
Pressure |
0.5-8 bar |
|
Water supply |
Cold or pre-mixed water |
|
Water flow rate |
6 l/min; 3, 1.9 or 1.3 l/min as an option |
|
Temperature |
Max. 70 °C |
|
Safety shut-off |
After 90 s of continuous flow (adjustable by remote control) |
|
Periodic flush |
24 h after last use |
|
RONDEO soap dispenser |
|
|
Installation |
Wall-mounted, concealed, on a support frame |
|
Power supply |
12 V transformer (for water and soap, with splitter connector). |
|
Soap |
1 l tank. Peristaltic pump for all types of liquid soap, detergent or antibacterial gel. |
|
Soap dose |
Default: 1.2-1.6 cc (adjustable by remote control). |
|
Filling |
Soap priming with a button on the pump or by remote control |
|
RONDEO hand dryer |
|
|
Installation |
Wall-mounted, concealed, on a support frame |
|
Rated power |
Adjustable from 800 to 1600 W (button accessible on the motor unit) |
|
Power supply |
200-240 V, 50-60 Hz, 1.3-1.6 kW. Current: 6.1-6.7 A |
|
Motor thermal protection |
Safety thermostat at 95 °C with automatic reset |
|
Heating element thermal protection |
Safety thermostat at 85 °C with automatic reset. Thermal cut-off fuse at 142 °C. |
|
Standby consumption |
0.3-0.4 W |
|
Safety shut-off |
After 60 s of continuous flow |
|
Sensor range |
170 mm ± 20, self-adjusting |
|
Protection rating |
IP34 |
- Hygienic rinse anti-legionella
- After 24 H of non-use
- Water supply
- Single supply
Related Products
