Floor standing WC and sink combination frontal fixations COMPAC
Stainless steel toilet-basin combination unit, fixed and connected through an access panel.
Technical sheet & documents
No technical sheet available for this reference. Request the sheet
VANDAL-RESISTANT TOILET-BASIN COMBINATION UNIT COMPAC
Version WC floor standing, front installation with access panel
Including vanity stamped ø 320 mm, soap held, drip-free adges, recessed self-closing push-button taps with WC flush and anti-block cold or pre-mixed water, stainless steel spout hang-free, recessed WC floor standing and roll dispenser for hygienic paper.
Specially made for penitentiary sites and site development which ask a high degree of security and a maximum utility in a minimum space.
The combination is reinforced with polyurethane foam high density to avoid bumps and dents.
WC floor standing certified EN-997 minimum flush 4 L and CE, welded body of the combination. Rinse edges avoiding concealment of products.
Stamped WC.
Installation:
- Wash basin: water inlet M1/2’’ threaded. Stainless steel tube 1’’ threaded evacuation, welded to the vanity bowl. Includes an overflow system.
- WC: supply M3/4“ threaded, flush tube direct flush to WC pre-mounted. Horizontal or vertical exit ø 100 mm.
- Fixations: wall mounted by 6 threaded rods M10 supplied, installation with technical room.
- Operation
- Temporized push button
- Material
- AISI 304 stainless steel
- Stainless steel thickness
- 1.5 mm
- Finish
- Brushed
- Water inlet
- 1/2"
3/4" - Water inlet thread
- Male
- Water inlet details
- M1/2'' threaded washbasin
M3/4'' threaded WC - Evacuation
- Ø 100 mm
- Outlet orientation
- Horizontal
Vertical - Outlet details
- WC Ø 100 mm S or P-trap (evacuation pre-connected)
- Fixing
- Wall mounted
Floor mounted - Mounting details
- By service hatch
- Dimensions
- W500 x D1000 x H990 mm version WC centre
W690 x D840 x H990 mm
VANDAL-RESISTANT TOILET-BASIN COMBINATION UNIT COMPAC
Version WC floor standing, front installation with access panel
Including vanity stamped ø 320 mm, soap held, drip-free adges, recessed self-closing push-button taps with WC flush and anti-block cold or pre-mixed water, stainless steel spout hang-free, recessed WC floor standing and roll dispenser for hygienic paper.
Specially made for penitentiary sites and site development which ask a high degree of security and a maximum utility in a minimum space.
The combination is reinforced with polyurethane foam high density to avoid bumps and dents.
WC floor standing certified EN-997 minimum flush 4 L and CE, welded body of the combination. Rinse edges avoiding concealment of products.
Stamped WC.
Installation:
- Wash basin: water inlet M1/2’’ threaded. Stainless steel tube 1’’ threaded evacuation, welded to the vanity bowl. Includes an overflow system.
- WC: supply M3/4“ threaded, flush tube direct flush to WC pre-mounted. Horizontal or vertical exit ø 100 mm.
- Fixations: wall mounted by 6 threaded rods M10 supplied, installation with technical room.
- Operation
- Temporized push button
- Material
- AISI 304 stainless steel
- Stainless steel thickness
- 1.5 mm
- Finish
- Brushed
- Water inlet
- 1/2"
3/4" - Water inlet thread
- Male
- Water inlet details
- M1/2'' threaded washbasin
M3/4'' threaded WC - Evacuation
- Ø 100 mm
- Outlet orientation
- Horizontal
Vertical - Outlet details
- WC Ø 100 mm S or P-trap (evacuation pre-connected)
- Fixing
- Wall mounted
Floor mounted - Mounting details
- By service hatch
- Dimensions
- W500 x D1000 x H990 mm version WC centre
W690 x D840 x H990 mm
Related Products
