Stainless steel wash trough with high splashback INTER-5-D

Multi-user wash trough made of AISI 304 stainless steel, with tap deck and high splashback for 1 to 5 users, combining hygiene, safety and full functionality.

The splashback protects the wall from splashes and makes cleaning easier.
Available made to measure; can easily be installed in a row.
The flat bottom takes a bucket.
No horizontal surface at the front or back, in line with HACCP requirements.
Front corners chamfered at 45°.
Vandal-resistant.

- Accessible to people with reduced mobility from a width of 100 cm.
- Robotic welding with no grooves in the corners, preventing bacterial growth.
- Inner corners along the length of the trough > 90° for easier cleaning.
- Flat bottom takes a 15 l bucket.
- No dust-trapping ledge under the trough, for hygiene.
- 80 mm tap deck with H40 mm splashback (also suitable for wall-mounted taps).
  Plus an additional 292 mm high splashback, glued or screwed on.
- Bowl depth 142 mm. Central perforated waste grid 1 1/2".
- Quick, easy installation with 4 fixing points.
- Complies with EN 14296 on the load resistance of sanitary appliances.

Rounded corners to prevent injury on impact	Pressed waste with no water retention or screws, for hygiene and easy cleaning	High-quality welding. Inner corners greater than 90°	Enough room for a bucket	Optional lift-up stainless steel grid, as a rest or drainer	"SOFT TOUCH" with wide folded lower edges