Floor-standing circular wash fountain LAGOON with self-closing taps, accessible

Floor-standing multi-user washbasin in stainless steel with a white circular synthetic marble basin, accessible to people with reduced mobility, with 6 or 8 built-in self-closing push-button taps for cold or pre-mixed water.

• Space-saving: makes the most of the available space and allows people to move freely around the washbasin.
• Robust enough for heavy use, it combines hygiene, safety and ease of use.
• The parabolic circular basin ensures efficient water drainage and prevents splashing.
• Easier installation with a single water supply connection and a single waste connection.
• Soap and paper towel dispensers available as options.

In washrooms, at least one washbasin in each group of washbasins must be accessible to people with reduced mobility and wheelchair users, as must various fittings such as a mirror, soap dispenser, hand dryer, coat hooks and towel rails. These fittings and furniture must be usable by a person standing or sitting.
To achieve this, they must be installed between 90 cm and 1.30 m above the floor.
To meet the standards for wheelchair users, there must be 70 cm of clear space under the washbasin and a width of 60 cm (between any legs of the washbasin unit), the top of the washbasin at a maximum height of 85 cm (i.e. a maximum washbasin height of 15 cm) and a depth of 30 cm, leaving enough room for the wheelchair and the user's legs under the washbasin.

The LAGOON circular washbasin, with its Ø113 cm white synthetic marble basin 13 cm high on a conical stainless steel pedestal, has its rim 83 cm above the floor and meets accessibility standards in public buildings.

- Self-closing taps and pipes pre-assembled and leak-tested.
Easier tap maintenance with front fixing on F1/2” stainless steel connectors.
Run time 15 s (± 5 s depending on pressure), flow rate 3 l/min (4 adjustable settings, not accessible to the public).
- Stainless steel pedestal with access panel for the water supply and waste connections.
- Zinc-plated steel anchor screws. 3 seals: with the floor, between pedestal, base and bowl.
- Water supply via M1/2’’ stop valve and waste via 2’’ trap (Ø 50 mm).

OPTIONS:

• Built-in push-button soap dispensers with 6 l reservoir, ref. ...-S
• Built-in thermostatic pre-mixing valve, ref. ...-TH
• Stainless steel tube concealing a top water supply (supply from the ceiling), ref. INT-CA2
• Coloured base and/or head
• Other tapware: touch-free, manual, mixer taps...

• Tapware available on request:

Push-button tap with front removal M3P (included)	Soft push-button tap M3DS	Single ceramic 1/2-turn tap M2	Touch-free sensor tap M9

• Soap dispensers available on request (3 to 4 dispensers):

Push-button soap dispensers with 6 l reservoir, ref. INT-SMR	Push-button soap dispensers with 800 ml soap cartridges built into the washbasin head, ref. INT-SM.	Liquid soap dispenser to fit above the head of the LAGOON washbasin, even at a later date, ref. INT-SP.

Soap refill system: for ref. INT-SMR, a chrome-plated cap built into the washbasin head allows the 6 l soap reservoir to be filled from above.

• Optional stainless steel dish for soap or a nail brush, on the column below the washbasin head, ref. INT-ST

• For refs INT-SM and INT-SP:
  Soap bottles ref. INT-AL-HL: Box of 12 bottles of 750 ml liquid soap. Mild, nourishing all-purpose soap.
  Sealed connector so that 100% of the contents are used. Good viscosity: no clogging of the soap system.
  Suitable for public washrooms, schools, sports and leisure, light industry...
  Heavy-duty soap bottles ref. INT-AL-HDL: Box of 12 bottles of 750 ml liquid soap. Gentle on the skin and deep-cleansing. Suitable for heavy industry, garages, workshops... Refreshing fragrance.
  
  

• Ref. INT-DS42: Support for 3 paper towel dispensers on the washbasin head (mirror optional).
  Not compatible with the soap dispensing systems with 800 ml cartridges built into the washbasin head (ref. INT-SM).