copy of Floor standing WC and sink combination frontal fixations COMPAC
installation without technical gallery
Technical sheet & documents
No technical sheet available for this reference. Request the sheet
COMBINATION WC WASH BASIN VANDAL PROOF COMPAC
Version WC floor standing, frontal installation with visit trap
Including vanity stamped ø 320 mm, soap held, drip-free adges, pushed temporized faucets recessed with WC flush and anti-block cold or pre-mixed water, stainless steel spout hang-free, recessed WC floor standing and roll dispenser for hygienic paper.
Specially made for penitentiary sites and site development which ask a high degree of security and a maximum utility in a minimum space.
The combination is reinforced with polyurethane foam high density to avoid bumps and dents.
WC floor standing certified EN-997 minimum flush 4 L and CE, welded body of the combination. Rinse edges avoiding concealment of products.
Stamped WC.
Installation:
- Wash basin: water inlet M1/2’’ threaded. Stainless steel tube 1’’ threaded evacuation, welded to the vanity bowl. Includes an overflow system.
- WC: supply M3/4“ threaded, flush tube direct flush to WC pre-mounted. Horizontal or vertical exit ø 100 mm.
- Fixations: wall mounted by 6 threaded rods M10 supplied, installation with technical room.
- Operation
- Temporized push button
- Material
- AISI 304 stainless steel
- Detailed composition
- 2.0 / 1.6 / 1.2 mm
- Stainless steel thickness
- 1.2 mm
1.6 mm
2 mm - Finish
- Brushed
- Water inlet
- 1/2"
3/4" - Evacuation
- Ø 100 mm
- Fixing
- Wall mounted
Floor mounted - Mounting details
- By service hatch
- Dimensions
- W500 x D1000 x H990 mm version WC centre
W690 x D840 x H990 mm - Warranty
- 10 years
- Outlet orientation
- Horizontal
Vertical - Outlet details
- WC Ø 100 mm S or P-trap (evacuation pre-connected)
- Connection gender
- Male
- Water inlet details
- M1/2'' threaded washbasin
M3/4'' threaded WC
COMBINATION WC WASH BASIN VANDAL PROOF COMPAC
Version WC floor standing, frontal installation with visit trap
Including vanity stamped ø 320 mm, soap held, drip-free adges, pushed temporized faucets recessed with WC flush and anti-block cold or pre-mixed water, stainless steel spout hang-free, recessed WC floor standing and roll dispenser for hygienic paper.
Specially made for penitentiary sites and site development which ask a high degree of security and a maximum utility in a minimum space.
The combination is reinforced with polyurethane foam high density to avoid bumps and dents.
WC floor standing certified EN-997 minimum flush 4 L and CE, welded body of the combination. Rinse edges avoiding concealment of products.
Stamped WC.
Installation:
- Wash basin: water inlet M1/2’’ threaded. Stainless steel tube 1’’ threaded evacuation, welded to the vanity bowl. Includes an overflow system.
- WC: supply M3/4“ threaded, flush tube direct flush to WC pre-mounted. Horizontal or vertical exit ø 100 mm.
- Fixations: wall mounted by 6 threaded rods M10 supplied, installation with technical room.
- Operation
- Temporized push button
- Material
- AISI 304 stainless steel
- Detailed composition
- 2.0 / 1.6 / 1.2 mm
- Stainless steel thickness
- 1.2 mm
1.6 mm
2 mm - Finish
- Brushed
- Water inlet
- 1/2"
3/4" - Evacuation
- Ø 100 mm
- Fixing
- Wall mounted
Floor mounted - Mounting details
- By service hatch
- Dimensions
- W500 x D1000 x H990 mm version WC centre
W690 x D840 x H990 mm - Warranty
- 10 years
- Outlet orientation
- Horizontal
Vertical - Outlet details
- WC Ø 100 mm S or P-trap (evacuation pre-connected)
- Connection gender
- Male
- Water inlet details
- M1/2'' threaded washbasin
M3/4'' threaded WC
Related Products
